ISRIC Data Hub
ISRIC Data Hub (ISRIC - World Soil Information)
Continents, countries, sea regions of the world.
WoSIS latest - Bulk density fine earth - 33 kPa
Bulk density of the fine earth fraction*, equilibrated at 33 kPa (kg/dm³). WoSIS_latest is a 'dynamic dataset' that contains the most recent complement of quality-assessed and standardised soil data served from WoSIS (ISRIC World Soil Information Service). The source data were shared by a wide range of data providers (see: https://www.isric.org/explore/wosis/wosis-contributing-institutions-and-experts). Being dynamic, the contents of 'wosis_latest' will change once new point data are acquired, cleansed and standardised, additional soil properties are considered, and/or when possible amendments are required. Static snapshots of 'wosis_latest' are released at irregular intervals for consistent citation purposes and to discuss methodological changes; the last snapshot is available at https://doi.org/10.5194/essd-16-4735-2024. For general information about WoSIS please see the FAQ-page at https://www.isric.org/explore/wosis/faq-wosis.
Licenced per profile, as specified by data provider and indicated in the data
ABSTRACT: The World Soil Information Service (WoSIS) provides quality-assessed and standardized soil profile data to support digital soil mapping and environmental applications at broad scale levels. Since the release of the ‘WoSIS snapshot 2019’ many new soil data were shared with us, registered in the ISRIC data repository, and subsequently standardized in accordance with the licenses specified by the data providers. The source data were contributed by a wide range of data providers, therefore special attention was paid to the standardization of soil property definitions, soil analytical procedures and soil property values (and units of measurement). We presently consider the following soil chemical properties (organic carbon, total carbon, total carbonate equivalent, total Nitrogen, Phosphorus (extractable-P, total-P, and P-retention), soil pH, cation exchange capacity, and electrical conductivity) and physical properties (soil texture (sand, silt, and clay), bulk density, coarse fragments, and water retention), grouped according to analytical procedures (aggregates) that are operationally comparable. For each profile we provide the original soil classification (FAO, WRB, USDA, and version) and horizon designations as far as these have been specified in the source databases. Three measures for 'fitness-for-intended-use' are provided: positional uncertainty (for site locations), time of sampling/description, and a first approximation for the uncertainty associated with the operationally defined analytical methods. These measures should be considered during digital soil mapping and subsequent earth system modelling that use the present set of soil data. DATA SET DESCRIPTION: The 'WoSIS 2023 snapshot' comprises data for 228k profiles from 217k geo-referenced sites that originate from 174 countries. The profiles represent over 900k soil layers (or horizons) and over 6 million records. The actual number of measurements for each property varies (greatly) between proﬁles and with depth, this generally depending on the objectives of the initial soil sampling programmes. The data are provided in TSV (tab separated values) format and as GeoPackage. The zip-file (446 Mb) contains the following files: - Readme_WoSIS_202312_v2.pdf: Provides a short description of the dataset, file structure, column names, units and category values (this file is also available directly under 'online resources'). The pdf includes links to tutorials for downloading the TSV files into R respectively Excel. See also 'HOW TO READ TSV FILES INTO R AND PYTHON' in the next section. - wosis_202312_observations.tsv: This file lists the four to six letter codes for each observation, whether the observation is for a site/profile or layer (horizon), the unit of measurement and the number of profiles respectively layers represented in the snapshot. It also provides an estimate for the inferred accuracy for the laboratory measurements. - wosis_202312_sites.tsv: This file characterizes the site location where profiles were sampled. - wosis_2023112_profiles: Presents the unique profile ID (i.e. primary key), site_id, source of the data, country ISO code and name, positional uncertainty, latitude and longitude (WGS 1984), maximum depth of soil described and sampled, as well as information on the soil classification system and edition. Depending on the soil classification system used, the number of fields will vary . - wosis_202312_layers: This file characterises the layers (or horizons) per profile, and lists their upper and lower depths (cm). - wosis_202312_xxxx.tsv : This type of file presents results for each observation (e.g. “xxxx” = “BDFIOD” ), as defined under “code” in file wosis_202312_observation.tsv. (e.g. wosis_202311_bdfiod.tsv). - wosis_202312.gpkg: Contains the above datafiles in GeoPackage format (which stores the files within an SQLite database). HOW TO READ TSV FILES INTO R AND PYTHON: A) To read the data in R, please uncompress the ZIP file and specify the uncompressed folder. setwd("/YourFolder/WoSIS_2023_December/") ## For example: setwd('D:/WoSIS_2023_December/') Then use read_tsv to read the TSV files, specifying the data types for each column (c = character, i = integer, n = number, d = double, l = logical, f = factor, D = date, T = date time, t = time). observations = readr::read_tsv('wosis_202312_observations.tsv', col_types='cccciid') observations ## show columns and first 10 rows sites = readr::read_tsv('wosis_202312_sites.tsv', col_types='iddcccc') sites profiles = readr::read_tsv('wosis_202312_profiles.tsv', col_types='icciccddcccccciccccicccci') profiles layers = readr::read_tsv('wosis_202312_layers.tsv', col_types='iiciciiilcc') layers ## Do this for each observation 'XXXX', e.g. file 'Wosis_202312_orgc.tsv': orgc = readr::read_tsv('wosis_202312_orgc.tsv', col_types='iicciilccdccddccccc') orgc Note: One may also use the following R code (example is for file 'observations.tsv'): observations <- read.table("wosis_202312_observations.tsv", sep = "\t", header = TRUE, quote = "", comment.char = "", stringsAsFactors = FALSE ) B) To read the files into python first decompress the files to your selected folder. Then in python: # import the required library import pandas as pd # Read the observations data observations = pd.read_csv("wosis_202312_observations.tsv", sep="\t") # print the data frame header and some rows observations.head() # Read the sites data sites = pd.read_csv("wosis_202312_sites.tsv", sep="\t") # Read the profiles data profiles = pd.read_csv("wosis_202312_profiles.tsv", sep="\t") # Read the layers data layers = pd.read_csv("wosis_202312_layers.tsv", sep="\t") # Read the soil property data, e.g. 'cfvo' (do this for each observation) cfvo = pd.read_csv("wosis_202312_cfvo.tsv", sep="\t") CITATION: Calisto, L., de Sousa, L.M., Batjes, N.H., 2023. Standardised soil profile data for the world (WoSIS snapshot – December 2023), https://doi.org/10.17027/isric-wdcsoils-20231130 Supplement to: Batjes N.H., Calisto, L. and de Sousa L.M., 2023. Providing quality-assessed and standardised soil data to support global mapping and modelling (WoSIS snapshot 2023). Earth System Science Data, https://doi.org/10.5194/essd-16-4735-2024.
Licenced per profile, as specified by data provider and indicated in the data (CC-BY or CC-BY-NC)
SOTER-based soil parameter estimates (SOTWIS) for the Indo-Gangetic Plains of India
This harmonized set of soil parameter estimates for the Indo-Gangetic Plains (IGP) of India, at scale 1:1 000 000, has been derived from soil and terrain data collated in SOTER format by staff of the National Bureau of Soil Survey and Land Use Planning (NBSS and LUP) at Nagpur, India. The data set has been prepared for use in the project on "Assessment of soil organic carbon stocks and change at ... national scale" (GEFSOC), which has IGP-India as one of its four case study areas (see http://www.nrel.colostate.edu/projects/gefsoc-uk/). The land surface of IGP-India has been characterized using 36 unique SOTER units, corresponding with 497 polygons. The major soils of these units have been described using 36 profiles, selected by national soil experts as being representative for these units. The associated soil analytical data have been derived from soil survey reports. Gaps in the measured soil profile data have been filled using a scheme of taxotransfer rules. Parameter estimates are presented by soil unit for fixed depth intervals of 0.2 m to 1 m depth for: organic carbon, total nitrogen, pH(H2O), CECsoil, CECclay, base saturation, effective CEC, aluminum saturation, CaCO3 content, gypsum content, exchangeable sodium percentage (ESP), electrical conductivity of saturated paste (ECe), bulk density, content of sand, silt and clay, content of coarse fragments, and available water capacity(-33 to-1500 kPa). These attributes have been identified as being useful for agro-ecological zoning, land evaluation, crop growth simulation, modelling of soil carbon stocks and change, and analyses of global environmental change. The current parameter estimates should be seen as best estimates based on the current selection of soil profiles and data clustering procedure; taxotransfer rules have been flagged to provide an indication of the confidence in the derived data. Results are presented as summary files and can be linked to the 1:1M scale SOTER map in a GIS, through the unique SOTER-unit code. The secondary SOTER data set for IGP-India is considered appropriate for exploratory studies at regional scale (greater than1:1M); correlation of soil analytical data should be done more rigorously when more detailed scientific work is considered.
Attribution 3.0 International (CC BY 3.0)
1) Batjes NH, Al-Adamat R, Bhattacharyya T, Bernoux M, Cerri CEP, Gicheru P, Kamoni P, Milne E, Pal DK and Rawajfih Z 2007. Preparation of consistent soil data sets for SOC modelling purposes: secondary SOTER data sets for four case study areas. Agriculture, Ecosystems and Environment 112, 26-34, http://dx.doi.org/10.1016/j.agee.2007.01.005 2) Batjes NH, Bhattacharyya T, Mandal C, Dijkshoorn K, Pal DK, Milne E and Gajbhiye KS 2004. Soil data derived from SOTER for studies of carbon stocks and change in the Indo-Gangetic Plains (India) (ver. 1.0; GEFSOC Project). Report 2004/06, ISRIC - World Soil Information and NBSS and LUP (ICAR, India), Wageningen,https://isric.org/sites/default/files/isric_report_2004_06.pdf (this data set) 3) Bhattacharyya T, Pal DK, Easter M, Batjes NH, Milne E, Gajbhiye KS, Chandran P, Ray SK, Mandal C, Paustian K, Williams S, Killian K, Coleman K, Falloon P and Powlson D 2007. Modelled soil organic carbon stocks and changes in the Indo-Gangetic Plains, India, between 2000 and 2030. Agriculture, Ecosystems and Environment 112, 84-94, http://dx.doi.org/10.1016/j.agee.2007.01.010 4) Chandran P, Bhattacharyya T, Ray SK, Durge SL, Mandal C, Sarkar D, Sahoo AK, Singh SP, Jagat Ram, Ram Gopal, Pal DK, Gajbhiye KS, Milne E, Aurangabadker B, Mendhekar P and Singh B 2005. Soil and terrain digital databases for IGP, India. Special Publication for Assessment of Soil Organic Carbon Stocks and Change at National Scale, National Bureau for Soil Survey and Land Use Planning (NBSS and LUP), Nagpur
WISE - Global Soil Profile Data, version 3.1
Version 3.1 of the ISRIC-WISE database (WISE3) was compiled from a wide range of soil profile data collected by many soil professionals worldwide. All profiles have been harmonized with respect to the original Legend (1974) and Revised Legend (1988) of FAO-Unesco. Thereby, the primary soil data ─ and any secondary data derived from them ─ can be linked using GIS to the spatial units of the digitized Soil Map of the World as well as more recent digital Soil and Terrain (SOTER) databases through the soil legend code. WISE3 holds selected attribute data for some 10,250 soil profiles, with some 47,800 horizons, from 149 countries. Individual profiles have been sampled, described, and analyzed according to methods and standards in use in the originating countries. There is no uniform set of properties for which all profiles have analytical data, generally because only selected measurements were planned during the original surveys. Methods used for laboratory determinations of specific soil properties vary between laboratories and over time; sometimes, results for the same property cannot be compared directly. WISE3 will inevitably include gaps, being a compilation of legacy soil data derived from traditional soil survey, which can be of a taxonomic, geographic, and soil analytical nature. As a result, the amount of data available for modelling is sometimes much less than expected. Adroit use of the data, however, will permit a wide range of agricultural and environmental applications at a global and continental scale (1:500 000 and broader). Preferred citation: Batjes NH 2009. Harmonized soil profile data for applications at global and continental scales: updates to the WISE database. Soil Use and Management 5:124–127, http://dx.doi.org/10.1111/j.1475-2743.2009.00202.x
Journal paper: 1)Batjes NH 2009. Harmonized soil profile data for applications at global and continental scales: updates to the WISE database. Soil Use and Management 5:124–127, http://dx.doi.org/10.1111/j.1475-2743.2009.00202.x Supporting documentation: 2) Batjes NH 2008. ISRIC-WISE Harmonized Global Soil Profile Dataset (Ver. 3.1). Report 2008/02, ISRIC – World Soil Information, Wageningen, 59p with dataset, https://isric.org/sites/default/files/isric_report_2008_02.pdf
Africa SoilGrids nutrients - Extractable Aluminium (Al)
Extractable Aluminium (Al) content of the soil fine earth fraction in mg/kg (ppm) as measured according to the soil analytical procedure of Mehlich 3 and spatially predicted for 0-30 cm depth interval at 250 m spatial resolution across sub-Saharan Africa using Machine Learning (ensemble between random forest and gradient boosting) using soil data from the Africa Soil Profiles database (AfSP) compiled by AfSIS and recent soil data newly collected by AfSIS in partnership with EthioSIS (Ethiopia), GhaSIS (Ghana) and NiSIS (Nigeria as made possible by OCP Africa and IITA), combined with soil data as made available by Wageningen University and Research, IFDC, VitalSigns, University of California and the OneAcreFund. [Values M = mean value predicted]. For details see below for peer reviewed paper (T. Hengl, J.G.B. Leenaars, K.D. Shepherd, M.G. Walsh, G.B.M. Heuvelink, Tekalign Mamo, H. Tilahun, E. Berkhout, M. Cooper, E. Fegraus, I. Wheeler, N.A. Kwabena, 2017. Soil nutrient maps of Sub-Saharan Africa: assessment of soil nutrient content at 250 m spatial resolution using machine learning. Nutriënt Cycling in Agroecosystems 109(1): 77-102). Maps produced for the Environmental Assessment Agency (PBL), funded by the Netherlands government, in collaboration with the AfSIS and the Vital Signs projects.
Project webpage: http://isric.org/projects/africa-soilgrids-soil-nutrient-maps-sub-saharan-africa-250-m-resolution Soil data (1): http://isric.org/projects/africa-soil-profiles-database-afsp Soil data (2): http://africasoils.net/services/data/soil-databases/
Africa SoilGrids nutrients - Extractable Sodium (Na)
Extractable Sodium content (Na) of the soil fine earth fraction in mg/kg (ppm) as measured according to the soil analytical procedure of Mehlich 3 and spatially predicted for 0-30 cm depth interval at 250 m spatial resolution across sub-Saharan Africa using Machine Learning (ensemble between random forest and gradient boosting) using soil data from the Africa Soil Profiles database (AfSP) compiled by AfSIS and recent soil data newly collected by AfSIS in partnership with EthioSIS (Ethiopia), GhaSIS (Ghana) and NiSIS (Nigeria as made possible by OCP Africa and IITA), combined with soil data as made available by Wageningen University and Research, IFDC, VitalSigns, University of California and the OneAcreFund. [Values M = mean value predicted]. For details see below for peer reviewed paper (T. Hengl, J.G.B. Leenaars, K.D. Shepherd, M.G. Walsh, G.B.M. Heuvelink, Tekalign Mamo, H. Tilahun, E. Berkhout, M. Cooper, E. Fegraus, I. Wheeler, N.A. Kwabena, 2017. Soil nutrient maps of Sub-Saharan Africa: assessment of soil nutrient content at 250 m spatial resolution using machine learning. Nutriënt Cycling in Agroecosystems 109(1): 77-102). Maps produced for the Environmental Assessment Agency (PBL), funded by the Netherlands government, in collaboration with the AfSIS and the Vital Signs projects.
WoSIS latest - Electrical conductivity - ratio 1:2.5
Ability of a 1:2.5 soil water extract to conduct electrical current (dS/m). WoSIS_latest is a 'dynamic dataset' that contains the most recent complement of quality-assessed and standardised soil data served from WoSIS (ISRIC World Soil Information Service). The source data were shared by a wide range of data providers (see: https://www.isric.org/explore/wosis/wosis-contributing-institutions-and-experts). Being dynamic, the contents of 'wosis_latest' will change once new point data are acquired, cleansed and standardised, additional soil properties are considered, and/or when possible amendments are required. Static snapshots of 'wosis_latest' are released at irregular intervals for consistent citation purposes and to discuss methodological changes; the last snapshot is available at https://doi.org/10.5194/essd-16-4735-2024. For general information about WoSIS please see the FAQ-page at https://www.isric.org/explore/wosis/faq-wosis.
Clay content (0-2 micro meter) mass fraction in ‰ at 6 standard depths. Predictions were derived using a digital soil mapping approach based on Quantile Random Forest, drawing on a global compilation of soil profile data and environmental layers. To visualize these layers please use www.soilgrids.org.
Attribution 4.0 International (CC BY 4.0), https://creativecommons.org/licenses/by/4.0/
https://www.isric.org/explore/wosis/wosis-contributing-institutions-and-experts https://doi.org/10.5194/soil-7-217-2021
Africa SoilGrids - Root zone moisture content at wilting point aggregated at top 30 cm
Volumetric moisture content (v%) of the soil fine earth fraction at permanent wilting point (at h=15,000 cm or pF 4.2), aggregated over rootable depth and the top 30 cm, mapped at 1km resolution
Attribution-NonCommercial 3.0 International (CC BY-NC 3.0), https://creativecommons.org/licenses/by-nc/3.0/
SoilGrids250m 2017-03 - Absolute depth to bedrock
Absolute depth to bedrock (in cm) predicted using the global compilation of soil ground observations. Accuracy assessement of the maps is availble in Hengl et at. (2017) DOI: 10.1371/journal.pone.0169748. Data provided as GeoTIFFs with internal compression (co='COMPRESS=DEFLATE'). Measurement units: cm.
Download GeoTIFF at aggregated 30 cm depth
ISRIC - World Soil Information (WDC - Soils)
Soil information, from the global to the local scale, has often been the one missing biophysical information layer, the absence of which has added to the uncertainties of predicting potentials and constraints for food and fiber production. The lack of reliable and harmonized soil data has considerably hampered land degradation assessments, environmental impact studies and adapted sustainable land management interventions. Recognizing the urgent need for improved soil information worldwide, particularly in the context of the Climate Change Convention and the Kyoto Protocol for soil carbon measurements and the immediate requirement for the FAO/IIASA Global Agro-ecological Assessment study (GAEZ v3.0), the Food and Agriculture Organization of the United Nations (FAO) and the International Institute for Applied Systems Analysis (IIASA) took the initiativeof combining the recently collected vast volumes of regional and national updates of soil information with the information already contained within the 1:5,000,000 scale FAOUNESCO Digital Soil Map of the World, into a new comprehensive Harmonized World Soil Database (HWSD). This database was achieved in partnership with: • ISRIC-World Soil Information together with FAO, which were responsible for the development of regional soil and terrain databases and the WISE soil profile database; • the European Soil Bureau Network, which had recently completed a major update of soil information for Europe and northern Eurasia, and • the Institute of Soil Science, Chinese Academy of Sciences which provided the recent 1:1,000,000 scale Soil Map of China.
Bulk density (fine earth) in cg/cm³ at 6 standard depths. Predictions were derived using a digital soil mapping approach based on Quantile Random Forest, drawing on a global compilation of soil profile data and environmental layers. To visualize these layers please use www.soilgrids.org.
SoilGrids250m 2.0 - Soil organic carbon stock
Soil organic carbon stock in t/ha for 0-30 cm depth interval. Predictions were derived using a digital soil mapping approach based on Quantile Random Forest, drawing on a global compilation of soil profile data and environmental layers. To visualize these layers please use www.soilgrids.org.
Soil pH x 10 in H2O at 7 standard depths (to convert to pH values divide by 10) predicted using the global compilation of soil ground observations. Accuracy assessement of the maps is availble in Hengl et at. (2017) DOI: 10.1371/journal.pone.0169748. Data provided as GeoTIFFs with internal compression (co='COMPRESS=DEFLATE'). Measurement units: NA.
Joint Research Centre of the European Commission - European Soil Data Centre (ESDAC)
International Institute for Applied Systems Analysis
Food and Agriculture Organization of the United Nations
Institute of Soil Science - Chinese Academy of Sciences